Replacing The Assy Lamp Bulb - Samsung NX58R4311SS Service Manual

3. Disassembly and Reassembly

3-9 Replacing the Assy Lamp Bulb

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range. Replace all panels before operating range. Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Assy Lamp
Bulb
This document can not be used without Samsung's authorization.
Explanation Photo
21
Explanation
1. Turn off the electrical supply going
to the range.
2. Shut off the gas shut-off valve in
the gas supply line to the range.
3. Remove the rear cover panel.
4. Open the oven door and remove
the racks from inside the oven.
5. The oven lamp bulb is in the
upper right-hand corner of the
oven cavity. Turn oven lamp cover
counterclockwise to loosen and
remove the cover.
6. Remove the oven light bulb.
7. When service is complete, Install
the bulb and light cover by turning
clockwise.