3. Disassembly and Reassembly
3-13 Replacing the Handle-Door
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing . Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal
injury from explosion, fire, or asphyxiation .
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be
present, and you can cut yourself if you are not careful .
Parts
Handle-Door
This document can not be used without Samsung's authorization.
Explanation Photo
25
Explanation
1. Remove the oven door from the
range .
2. Place the oven door on a padded
work surface with the front glass
facing down .
3. Remove 3 bottom screws from the
door .
4. Remove 2 Handle-screws from the
door .
5. Lift the door rear assembly off the
front assembly and set it aside
6. Remove 2 spacers and 2 screws .
7. Remove 2 screws to replace the
Handle-Door