4
STRUCTURE (PARTS IDENTIFICATION)
4.1
Parts identification
MR-CV18K(4) or lower
This diagram shows the terminal cover in the open position. For how to open and close the terminal cover, refer to the
following.
Page 24 Opening and closing the terminal cover
(1) Display section
(12) Main circuit terminal block (TE1)
4 STRUCTURE (PARTS IDENTIFICATION)
18
4.1 Parts identification
(2) Rotary switch for converter setting (SW1)
(3) Protection coordination connector (CN4)
(5) Manufacturer setting connector (CN41)
(6) I/O signal connector (CN24)
(4) Manufacturer setting connector (CN9)
(11) Alarm output connector (CN25)
(7) Magnetic contactor control connector (CN23)
(14) Rating plate
(8) Charge light
(9) L+/L- terminal (TE2)
(10) Control circuit terminal L11/L21 (TE3)
(13) Protective earth (PE) terminal