Configuration Including Peripheral Equipment - Mitsubishi Electric -MR-CV User Manual

1.4

Configuration including peripheral equipment

• Equipment other than the converter unit, drive unit and servo motor is optional or a recommended product.
The following is an example using the MR-J5D1-100G4 and MR-CV11K4.
The actual converter unit and drive unit are mounted closely together.
R S T
Power supply
Molded-case
circuit breaker
(MCCB)
Line noise filter
(FR-BLF)
*1
AC reactor
(MR-AL-_K)
Magnetic
contactor
(MC)
*1 When sharing the power supply of an inductive load such as a cooling fan with the main circuit of the MR-CV_, do not supply the power
from between the MR-CV_ and AC reactor or from the secondary side of the magnetic contactor to the inductive load. Connect the
inductive load on the power supply side beyond the area in the dotted line.
1 FUNCTIONS AND CONFIGURATION
10
1.4 Configuration including peripheral equipment
Mounting attachment
Molded-case
circuit breaker
(MCCB)
Protection
coordination cable
Controller
CN4
I/O signal
Magnetic
contactor
drive output
L1
L2
Power regeneration
converter unit
CN40B
CN40A
CN1A
CN1B
CN5
CN3
L+
L-
L11
L21 L+
L-
L11
L3
L21
V
W
CN2A
Servo motor
Personal
computer
MR Configurator2
Drive unit
Protection
coordination cable
CN40A
CN1A
L+
L-
E
U
L11
L21
E
U
V
W
CN2A
Servo motor
Drive unit