Graco Pro 230ES Repair And Parts Manual page 7

A Airless spray gun
B Power switch
C Pressure control knob
D Pump fluid outlet fitting
E Filter
™
F
Endurance Pump
G Suction tube
H Prime tube (with diffuser)
J Prime/Spray valve
K Serial Tag (below sprayer frame)
L Inlet screen
M Paint hose
Q Tip guard
R Reversible spray tip
S Gun trigger safety lever
T Gun fluid inlet fitting
V Gun fluid filter
W Hose wrap Rack
X Pail hanger
3A2817A
Dispenses fluid.
Turns sprayer ON and OFF.
Increases (clockwise) and decreases (counter-clockwise) fluid pres-
sure in pump, hose, and spray gun.
Threaded connection for paint hose.
Filters fluid coming out of pump to reduce tip plugging and improve fin-
ish.
Pumps and pressurizes fluid and delivers it to paint hose.
Draws fluid from paint pail into pump.
Drains fluid in system during priming and pressure relief.
• In PRIME position (pointing down) directs fluid to prime tube.
• In SPRAY position (pointing forward) directs pressurized fluid to
paint hose.
• Automatically relieves system pressure in overpressure situations.
Sprayer model and serial number information
Prevents debris from entering pump.
Transports high-pressure fluid from pump to spray gun.
Reduces risk of fluid injection injury.
• Atomizes fluid being sprayed, forms spray pattern and controls fluid
flow according to hole size.
• Reversed, it unclogs plugged tips without disassembly.
Prevents accidental triggering of spray gun.
Threaded connection for paint hose.
Filters fluid entering spray gun to reduce tip clogs.
Stows paint hose.
For transporting pail by its handle.
Component Identification
7