Fan Replacement - Graco Pro 230ES Repair And Parts Manual

Fan Replacement

Removal
1. Relieve pressure, page 9. Disconnect power cord
from outlet.
2. Remove four screws (12) and shroud (23).
3. Loosen tensioning screw (126) on fan (125). (Pro
270ES only)
4. Pull off fan (77) or (125).
77
3A2817A
125
126
(Pro 270ES shown)
Installation
1. Slide new fan (125) in place on back of motor. Be
sure blades of fan face motor as shown.
2. Tighten screw (126).
3. Replace shroud (23) and four screws (12)
12
Fan Replacement
23
23