Group Name Setting - Mitsubishi Electric G-50A Instruction Book

5 - 6 Group name setting

(1) Setting method
• Specify new group name.
• Either alphabet, numeric characters, hyphens or spaces can be used for name setting.
• Maximum of ten characters can be set.
• When the group name is displayed on the operation monitor screen, the first three characters of the group name
are displayed.
1Press the (or
1
"4 GROUP SETTING") of the initial setting menu.
2The group configuration setting screen is displayed.
3Press the
SET".
ENTER
4Press the switch one time.
The group name setting screen is displayed.
5The character " " is displayed in reverse.
6Press the
sired character.
ENTER
7Press the switch.
The selected character is displayed in the group name display area.
8Repeat operation 6 or 7 and set the group name.
When incorrect character is set, refer to section "Group name correction
method (page 32)".
Group name display area
– 31 –
) switch to select "1 GROUP SETTING" (or
4
switch to move the cursor to the "GROUP NAME
switch to move the cursor to the de-