Interlocked Operation Setting - Mitsubishi Electric G-50A Instruction Book

5 - 5 Interlocked operation setting

• Registration of interlocked operation of Ventilation unit (OA processing unit and LOSSNAY) with single or multiple
indoor unit is performed. All indoor units to be interlocked with ventilation unit for operation should be registered for
the interlocking with ventilation unit.
<Example for the interlocked group configuration>
051
NEXT
001 002 003
101
1Simultaneously press the
screen for 2 seconds.
NOTE:
2Initial setting menu screen is displayed.
3Press the
4The interlocked setting screen is displayed.
Minimum address of the interlocked OA processing unit or LOSSNAY
unit which can be set to interlock with indoor unit is displayed on the
"INTERLOCKED UNIT ADDRESS" display position. And the cursor is
displayed in the unit address display position.
5Press the
locked OA processor unit or LOSSNAY that the setting will be performed
on.
Duct
004 005
102
Always perform the mode change operation from the user
operation menu.
Mode change operation from other screens is ineffective even
if performed.
switch to select "2 INTERLOCKED SETTING".
2
switch to display the address number of the inter-
GROUP
SELECT
– 29 –
Outdoor unit
Indoor unit
M-NET local remote controller
OA processing unit or LOSSNAY
M-NET
Transmission line
and keys on the user operation menu