Setting the date and time
Mode dial
1
, Set the mode dial to
• You can also carry out this operation when the
,
mode dial is set to
S, A, M, SCN,
.
• To change the date and time, set the mode dial
to SET UP, select [CLOCK SET] in
(SETUP 2) (page 112), and perform the
procedure from step 3.
16
POWER switch
2
.
, Slide the POWER switch in the
direction of the arrow to turn
on the power.
or
The POWER lamp (green) lights up and the
CLOCK SET screen appears on the screen.
CLOCK SET
Y/M/D
M/D/Y
D/M/Y
2002 /
1
/ 1
12
:
00
OK
AM
CANCEL
OK
, Select the desired date display
Select from [Y/M/D] (year/month/day),
[M/D/Y] (month/day/year) or [D/M/Y]
(day/month/year).
• If the rechargeable button battery, which
CLOCK SET
2002 /
1
/ 1
12
OK
3
format with v/V on the control
button, then press z.
provides the power for saving the time data, is
ever fully discharged (page 113), the CLOCK
SET screen will appear again. When this
happens, reset the date and time, by starting
from step 3 above.
Y/M/D
M/D/Y
D/M/Y
:
00
OK
AM
CANCEL