Deleting Unnecessary Portions Of Movies - Sony DSC-F717 Operating Instructions (primary manual) Operating Instructions Manual

e Decide on a cutting point.
Press the center z at the desired
cutting point.
60 min
160
10/10
101
DIVIDE
00:00:02
DIVIDING
POINT
c C
OK
CANCEL
EXIT
OK
When you want to adjust the cutting
point, use [c/C] (frame forward/
rewind) and adjust the cutting point
using b/B. If you want to change the
cutting point, select [CANCEL]. The
playback of the movie starts again.
f When you have decided on a
cutting point, select [OK] with
v/V, and press z.
g Select [OK] with v, then press
z.
The movie is cut.
The recording folder appears at the
upper right of the screen.
To cancel cutting
In Step 5, select [EXIT]. The movie
appears on the screen again.
80
• The cut movie are recorded as the newest files
in the selected recording folder.
• You cannot cut the following files.
– Clip Motion files
– Multi Burst files
– Still image files
– MPEG movie files not long enough to cut
– Protected MPEG movie files
• You cannot restore files once you cut them.
• The original file is deleted when you cut it.
Deleting unnecessary
portions of movies
a Cut an unnecessary portion of
a movie (page 79).
b Display the portion of the
movie you want to delete.
c Press MENU.
The menu appears.
d Select [DELETE] with b/B,
then press z.
e Select [OK] with v, then press
z.
The movie currently displayed on the
screen is deleted.