2 To wall outlet (wall socket)
Power cord
(mains lead)
4
AC power adaptor
, Connect the power cord (mains
lead) to the AC power adaptor
and then to a wall outlet (wall
socket).
The /CHG lamp (orange) lights up when
charging begins, and goes off when
charging is completed.
• After charging the battery pack, disconnect the
AC power adaptor from the DC IN jack of your
camera.
12
To remove the battery pack
1
Open the battery/"Memory Stick" cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
/CHG lamp
Battery eject lever
Battery remaining indicator
The battery remaining indicator on the screen
shows the remaining shooting or viewing time.
60min
2560
101
• The displayed remaining time may not be
correct under certain circumstances or
conditions.
• When you switch the FINDER/LCD switch, it
takes about one minute for the correct battery
remaining time to appear.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC-L10A/
L10B AC power adaptor at a temperature of 25°C
(77°F).
Charging time
Battery pack
(min.)
NP-FM50 (supplied) Approx. 150
6