Sony DSC-F717 Operating Instructions (primary manual) Operating Instructions Manual page 108

When the mode dial is set to
Item
(IMAGE SIZE)
PFX (P.EFFECT)
When the mode dial is set to
Item
(IMAGE SIZE)
±
(FLASH LEVEL)
PFX (P.EFFECT)
(SHARPNESS)
When the mode dial is set to
Item
(INTERVAL)
(P.QUALITY)
PFX (P.EFFECT)
(SHARPNESS)
108
(when [MOVING IMAGE] is set to [MPEG MOVIE] in the SET UP settings)
Setting
320(HQX) / 320×240 / x160×112
SOLARIZE / SEPIA / NEG.ART /
xOFF
(when [MOVING IMAGE] is set to [CLIP MOTION] in the SET UP settings)
Setting
xNORMAL / MOBILE
HIGH
xNORMAL
LOW
SOLARIZE / SEPIA / NEG.ART /
xOFF
+2 / +1 / x0 / –1 / –2
(when [MOVING IMAGE] is set to [MULTI BURST] in the SET UP settings)
Setting
1/7.5 / 1/15 / x1/30 (NTSC)
1/6.3 / 1/12.5 / x1/25 (PAL)
xFINE / STANDARD
SOLARIZE / SEPIA / NEG.ART /
xOFF
+2 / +1 / x0 / –1 / –2
Description
Selects the MPEG image size when shooting movies (page 75).
Sets the image special effects (page 62).
Description
Selects the Clip Motion image size (page 57).
– Makes the flash level higher than normal.
– Normal setting.
– Makes the flash level lower than normal.
Sets the image special effects (page 62).
Adjusts the sharpness of the image. The
setting is 0).
Description
– Selects the Multi Burst shutter interval in NTSC mode.
– Selects the Multi Burst shutter interval in PAL mode.
* The shutter interval settings differ depending on the setting of the [VIDEO
OUT] item in the SET UP settings (page 112).
Selects the image quality (page 31).
Sets the image special effects (page 62).
Adjusts the sharpness of the image. The
setting is 0).
indicator appears (except when the
indicator appears (except when the