Contex IQ Quattro X Series User Manual page 51

Maintenance
26
Glass plate location
•
Identify the glass groove furthest from your body
•
Place the lower edge of the glass plate in the rear position groove
•
Carefully tilt the upper edge (the edge closest to your body) down until the
glass plate rests in the two rear and front position grooves
27
Lock the glass in place
•
Hold down the latch release button nearest to the scanner keypad
•
Press down on the glass near to the latch and click it into place
•
Working to the left, move to the next latch and click that into place
•
Repeat for any remaining catches
•
Check all latches are properly gripping the edge of the glass before moving
to the next step
Rear position groove
Glass plate lower edge
51