Maintenance
25
Installing a new scanner glass plate
•
Pick up the glass plate from its ends to avoid touching the glass surface
•
Do not touch the underside of the glass as this will not be cleaned during regular
maintenance
•
Stand at the front of the scanner
•
Use the direction of the beveled edges of the glass to determine the underside
•
Hold the glass so the underside faces down and at an angle towards your body as
shown
•
Maintaining the angle carefully lower the glass into the groove nearest the back of
the upturned scanner lid (see next step)
CAUTION: The glass plate is fragile. Take care not to break it.
Glass Plate Profile:
As you lower the glass plate into the scanner, hold it at an angle
similar to that shown in the illustration:
Underside surface of glass plate
(This side faces your body as you insert the glass plate)
50
Top surface of glass plate