Interface Cable Connection - SATO PV4 Service Manual

2-12-2 Interface Cable Connection

Ver. 1.00
1) Open the Interface Cap ①.
2) Connect the external communication
cable ② to the cable connector of the
printer.
3) Connect the interface cable to the USB
connector of the device (PDAs, PCs,
etc.).
NOTE
The interface cable for the printer is either a
Serial/USB cable provided by
SATO (optional) or USB Type-C cable
supporting USB2.0.
USB Type-C connection
Serial/USB 14pin connection
(for the cable provided by SATO(optional))
- 24 -
PV4
Power connection