Ariens Sno-Thro Compact Series Service Manual page 45

6. Remove bushing retainer from gearcase. See
Figure 95.
See Figure 96.
7. Press auger shaft through the right side of gearcase.
NOTICE: DO NOT strike auger shaft end; use a press.
8. Remove seal, bushing and washer from auger shaft.
Figure 95
Figure 96
9. With a flathead screwdriver or similar pry bar, remove
front seal cover and discard. See Figure 97.
10. With a snap ring pliers, remove retaining ring. See
Figure 98.
EN – 41
Figure 97
Figure 98