Related Manuals for Daewoo Tornado Cylinder
Summary of Contents for Daewoo Tornado Cylinder
- Page 1 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safeguards
Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference: Read and familiarise yourself with all operating instructions before using this •... - Page 3 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual Do not pull or carry the Vacuum Cleaner by the electrical cord, use the handle • provided. Ensure fingers and other objects are never placed in any part of the vacuum •...
- Page 4 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual Description of Parts – Cylinder detail 18. Filter cover 19. Cyclonic filter 20. Dust release catch Assembling Your Vacuum Cleaner CAUTION Ensure that the vacuum cleaner is not connected to the mains supply before using the attachments.
- Page 5 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual Using Your Vacuum Cleaner 1. Pull the Mains Cable and Plug (5) out of the vacuum cleaner, being careful not the pull the cable out beyond the red mark but after the yellow mark.
- Page 6 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual Using the power/speed controller (4) This control is useful for varying the suction power. Rotate the control downwards to reduce power whilst cleaning hard floors or similar and rotate upwards to increase suction power for carpets, rugs, etc.
- Page 7 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual 7. Finally, remove the Rear outlet & Hepa filter (3) and wash the filter clean ensuring it is thoroughly dry before reuse. Care and Use of your Vacuum Cleaner WARNING Always disconnect the cleaner from the mains power supply before cleaning.
- Page 8 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual Fitting a new plug The mains lead must be connected as shown below. The wires are coloured with the following code - Brown wire = Live (L), Blue wire = Neutral (N).
-
Page 9: Troubleshooting Guide
Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual Troubleshooting Guide Problem Possible Cause Solution Unit fails to turn on. The unit may not be Ensure the plug is fully properly plugged in. inserted into the socket and The fuse may have the socket is switched on. - Page 10 Tornado Cylinder 700W Cyclonic Vacuum FLR00046 User Manual IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE...