Removing The Rollator Bracket; Positioning The Rear Reflector; Changing The Colored Shrouds - Invacare pegasus pro User Manual

Invacare® Pegasus Series

5.2.2 Removing the rollator bracket

1. Loosen the screws (1).
2. Pull the rollator bracket out of the fixtures.

5.2.3 Positioning the rear reflector

CAUTION!
Risk of accident due to poor visibility
If you wish to use your mobility device on public
roads and a rear reflector is required by national
legislation, then the rollator bracket may not
cover the rear reflector.
– Make sure that the rear reflector is mounted
in such a way that a sufficient amount of the
reflective area is visible.
32
1. Position the rear reflector as shown in the drawing.

5.3 Changing the colored shrouds

It is possible to change the color of your scooter by replacing
the colored shrouds.
1. Remove the existing shrouds carefully.
2. Place the plastic nose A into the intended holes B and
click in the new shrouds.
1638629-A