Fagor DCM21 System Manual page 3

Manufacturer: Fagor Automation, S. Coop.
Barrio de San Andrés s/n, C.P. 20500, Mondragón -Guipúzcoa- (SPAIN)
We hereby declare, under our responsibility that the product:
Fagor DC Servo Drive System.
consisting of the following modules and motors:
Servodrives:
DC Motors:
mentioned on this declaration,
with the basic requirements of the European Directives 73/23/CE on Low Voltage (Basic Safety
Regulation, Machinery Electrical Equipment EN60204-1:95) and 89/336/CE on Electromagnetic
Compatibility (EN 61800-3:1996, Specific Regulation on Electromagnetic Compatibility for Servo
Drive Systems).
Fagor offers you a wide range of servo drive systems (motor and drive) for applications requiring
between 1 and 12 Nm at speeds between 1200 rpm and 4000 rpm.
This manual describes the elements in detail and guides step by step through the installation and
setup of the drive system.
When installed for the first time, it is a good idea to read the whole document.
Should you have any doubts or questions, please do not hesitate to contact our technicians at any
of our subsidiaries worldwide.
Thank you for choosing Fagor.
DC Servo Drive System Manual Ver: 0009
Declaration of conformity
DCS Series
DCM Series
In Mondragón, September 22nd, 2000
Introduction
DC - 3/32