Connecting The Computers - Belkin OmniView F1DH102U User Manual

Kvm switch with audio soho series

Hide thumbs Also See for OmniView F1DH102U:

Table of Contents

Connecting the Computers to the KVM Switch

1. Boot up the computer you wish to connect via USB as you would

normally with the USB keyboard, monitor, and USB mouse connected

directly to the computer. Once the operating system has loaded,

attach the male and female VGA KVM cable connectors to the Switch.

Then attach the USB KVM cable connector to the back of the

computer. The operating system will automatically install the Switch.

Do this for all USB connections.

2. Shut down your computer. Take the two male VGA cable ends and

connect them to the appropriate female VGA ports on the back of the

computer. Connect the speaker audio connector to the computer's

audio-output port. Do the same for the microphone connection. Do this

for all computers.

STEP-BY-STEP INSTALLATION GUIDE

Table of Contents

Omniview f1dh104u