KVM Switch allow for simple, manual port selection. LED Display: LEDs are added to the front of the OmniView E Series KVM Switch for easy status monitoring. A lit LED indicates which computer the console has control of. When using the front-panel push button, the LED will...
8/10/01 7:25 AM Page 4 OVERVIEW OVERVIEW Operating Systems Unit Display Diagrams with Explanation OmniView E Series KVM Switches are for use on PS/2-based computers. The Front of the OmniView E Series KVM Switch: Platforms: • Windows ® 3.x/95/98/2000/Me/NT ®...
P73775-A-E Series-man.qxd 8/10/01 7:25 AM Page 6 OVERVIEW OVERVIEW The Rear of the OmniView E Series KVM Switch: Specifications Part No.: F1DB102P, F1DB104P Power: By PS/2 keyboard port or optional 9V DC, 600mA AC adapter with center Computer pin positive polarity...
Where to Place the KVM Switch: This section provides complete instructions for the hardware setup of a The OmniView E Series KVM Switch is designed to sit on the desktop. single E Series KVM Switch. (F1DB102P or F1DB104P) Where you place the KVM Switch will be based on the location of your Important Note: CPUs and the length of your cables.
Your 2-Port connect the male end of Belkin E Series KVM Switch should now be ready for use. the cable to the VGA You can select which computer to operate by either the push-button...
P73775-A-E Series-man.qxd 8/10/01 7:25 AM Page 12 USING YOUR E SERIES KVM SWITCH USING YOUR E SERIES KVM SWITCH Selecting a Computer Using Keyboard Hot Key Commands AutoScan Mode In AutoScan mode, the E Series KVM Switch remains on one port You can conveniently change ports with the switch through a keyboard for 10 seconds before switching to the next.
F1DS102P SOHO Series 2-Port PS/2 KVM Switch F1DS104P SOHO Series 4-Port PS/2 KVM Switch OmniView E Series. These KVM devices allow you to control two or four F1DS102T SOHO Series 2-Port PS/2 & USB KVM Switch computers from one console and make switching between computers F1DS104T SOHO Series 4-Port PS/2 &...
, or ® ® the cables and proper connectors to complete the installation of the Belkin USB keyboards, video, and mouse signals into PS/2 and VGA. OmniView Switch of your choice. All OmniView All-In-One Cable Kits offer full compatibility with Belkin F1D080 - The OmniView PS/2 MAC Adapter ™...
25 feet (7.5m) away from your computer. If your computer needs to be more than 25 feet (7.5m) from the KVM switch, you can use the Belkin Q: Does the E Series KVM Switch require an AC adapter? CAT5 Extender to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4) away using standard CAT5 UTP cable.
A: Yes, the E Series KVM Switch works with Sun computers when used with to see if the problem still appears. with the Belkin OmniView PS/2 SUN Adapter (F1D082). I am getting a black screen on my monitor. Q: How long is the warranty for the E Series KVM Switch? •...
Page 13
P73775-A-E Series-man.qxd 8/10/01 7:25 AM Page 22 TROUBLESHOOTING TROUBLESHOOTING • If you are using the keyboard software that was included with When I switch from one port to another, mouse movement is your keyboard, uninstall it and install the standard Microsoft completely erratic.
Page 14
Belkin Components warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product.
Page 15
P73775-A-E Series-man.qxd 8/10/01 7:25 AM Page 26...