Equipment Requirements - Belkin OmniView F1DA104Pea User Manual

Overview
Front-Panel Push Button:
Direct-access port selectors, located conveniently on the front panel of
the PRO2 PS/2, allow for simple, manual port-selection. Each button
controls a port.
LED Display:
An LED display on the face of the PRO2 PS/2 serves as a status monitor.
An LED next to each direct-access port selector illuminates to indicate
that the console currently controls the corresponding computer. As a port
selector is pushed, the LED next to it will light up. A flashing port LED
indicates that there is no computer connected to that port.
Seven-Segment LED Display:
When daisy-chaining multiple PRO2 PS/2s together, the seven-segment
LED display serves as a quick indicator of the selected BANK.
Equipment Requirements Cables:
To connect to the PRO2 PS/2, each PS/2 computer requires one VGA
cable, one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard
and mouse cables must have PS/2 male-to-PS/2 male connectors.
Video resolution support of up to 2048x1536@85Hz requires use of a
75-Ohm coaxial VGA cable to preserve signal integrity. VGA cables must
have HDDB15 female-to-HDDB15 male connectors.
Belkin highly recommends that you use OmniView All-In-One PRO Series
Plus Cables. These cables offer the highest quality possible to ensure
optimal data transmission. All-In-One Cables are molded together for
a clean and organized setup; are double-shielded to reduce EMI/RFI
interference; have strain-relief construction for added durability; come
with a ferrite bead for noise immunity; and include PC99 color-coded
connectors for easy identification and connection. The PRO Series Plus
Cables include an industry-standard, 14-pin, coaxial VGA cable and
nickel-plated connectors for high-resolution applications.
3
1
1
2
3
4
5
6
7
8
9
10