Feature Overview - Belkin OmniView F1DA104Pea User Manual

Overview
1
1
The PRO2 PS/2s allow you to control up to a maximum of 256 PS/2
computers with one keyboard, monitor, and mouse. They support PS/2
2
input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and
XGA-2 video.
3

Feature Overview

Hot Keys:
4
Hot key functionality allows you to select a desired port using
designated key commands. By using a simple hot key sequence
5
on your keyboard, selecting one computer from as many as 256
computers is instantaneous. For a listing of complete hot key
instructions and commands, see pages 17-19
6
AutoScan:
7
The AutoScan feature allows you to set your PRO2 PS/2 to scan and
monitor the activities of all operating computers connected to the
switch—one by one. The time interval allotted for each computer can
8
be defined or adjusted through the On-Screen Display (OSD) menu.
For complete instructions on AutoScan usage, please refer to page 18.
9
Video Resolution:
Through a 400MHz bandwidth, the PRO2 PS/2s support video
10
resolutions of up to 2048x1536@85Hz. To preserve signal integrity at
these higher resolutions, your PRO2 PS/2 requires 75-Ohm coaxial
VGA cabling
Flash Upgrade:
Flash upgradeable firmware allows you to install the latest firmware
for your PRO2 PS/2. This enables your PRO2 PS/2 to maintain
consistent compatibility with the latest devices and computers.
Firmware upgrades are free for the life of your PRO2 PS/2. Refer to
the enclosed flash upgrade instruction document or visit us at belkin.
com for complete upgrade information and support.
On-Screen Display (OSD):
The OSD feature simplifies server management by allowing you to
assign individual names to each connected server throughout the
system. It provides a visual means of switching between computers
and setting the time interval for the AutoScan function.
2