Mazda 3 Sedan 2019 Manual page 42

Features
Information
Item
Tire pressure
monitor
Battery Health
Next Service
Date
Set Next Service
Date
Vehicle Mainte‐
Set Next Service
nance Settings
Distance
Reset Oil Change
Distance
Reset Service In‐
terval
2-8
The current tire pressure can be checked.
1. When tire pressures were last modified
2. Air pressure of each tire
3. Tire pressure condition of each tire
When air pressure is low: Yellow color

When air pressure is correct: Blue color

When air pressure cannot be monitored: Black color

4. Tire pressure units
NOTE
While the tire pressure monitoring system is learning the tire positions,

such as immediately after a tire position has been changed, the tire
pressure at the tire position prior to it being changed is displayed until
the system completes the learning. For this reason, the tire pressures
displayed for the tire positions may be different from the actual tire
pressures at the tire positions.
The air pressure displayed on the display may be different from the val‐

ue measured using an air pressure gauge.
The display units for the tire pressures can be changed.

Refer to Settings on page 2-101.
The maximum capacity of the drive battery is displayed.
The method of setting the next maintenance can be selected from the fol‐
lowing.
Automatic

Manual

If "Next Service Date" is set to "Manual", the next maintenance date can
be set.
If "Next Service Date" is set to "Manual", the traveled distance until the
next maintenance period can be set.
The "Distance Until Oil Change" content can be reset.
After replacing the engine oil, perform the reset (engine oil data resetting)
of the recorded value in this item.
The "Next Service" date and distance are reset.
Explanation