Mazda 3 Sedan 2019 Manual page 180

Trouble
Troubleshooting
Symptom
Pairing cannot be performed again
Automatically connects, but then
disconnects suddenly
Does not connect automatically
when starting the engine or EV sys‐
tem
4-6
Cause
Pairing information registered to
this unit or your Bluetooth
is not recognized correctly.
Depending on the Bluetooth
®
vice, Bluetooth and Find Mode
may turn off automatically after a
period of time has passed.
The programmed pairing informa‐
tion is updated when the Bluetooth
device's OS is updated.
Depending on the Bluetooth
®
vice, Bluetooth and Find Mode
may turn off automatically after a
period of time has passed.
Solution method
Perform pairing using the following
procedure:
1. Delete the target Bluetooth
vice on the Mazda Connect.
2. Delete "Mazda" from the Blue‐
®
tooth search screen of the
Bluetooth
®
device
3. Perform pairing again.
If pairing is not possible using the
above procedure, turn off the Blue‐
®
tooth device's power once and
then turn it back on. If pairing is still
not possible after this, contact an ex‐
pert repairer (we recommend an Au‐
thorized Mazda Repairer).
Make sure that Bluetooth

®
de‐
Find Mode
*1
reconnect.
Turn off the Bluetooth

power once and then turn it back
on.
Perform pairing using the following
procedure:
1. Delete the target Bluetooth
vice on the Mazda Connect.
2. Delete "Mazda" from the Blue‐
®
tooth search screen of the
Bluetooth
®
3. Perform pairing again.
If pairing is not possible using the
above procedure, turn off the Blue‐
®
tooth device's power once and
then turn it back on. If pairing is still
not possible after this, contact an ex‐
pert repairer (we recommend an Au‐
thorized Mazda Repairer).
Make sure that Bluetooth

®
de‐
Find Mode
*1 reconnect.
Turn off the Bluetooth

power once and then turn it back
on.
®
de‐
®
device.
®
and
*1
are turned on and
®
device's
®
de‐
®
device.
®
and
*1
are turned on and
®
device's