Install Majestic Decorative Barrier Front And Hood - Majestic QUARTZ Series Installation Manual

G. Install Majestic Decorative Barrier Front
and Hood
WARNING! Risk of Fire! Install ONLY decorative barrier
fronts approved by Hearth & Home Technologies. Unap-
proved decorative barrier fronts could cause fireplace to
overheat.
IMPORTANT! This fireplace requires an installed
decorative barrier front to prevent direct contact with
the hot viewing glass. DO NOT operate the fireplace
with the barrier removed.
Contact your dealer or Hearth & Home Technologies if
the barrier is not present or help is needed to properly
install one.
1. Remove decorative barrier front by lifting up and away
from appliance.
2. Remove four shoulder bolts from manual bag assembly
and install as shown in Figure 11.3.
3. Hang decorative barrier front onto shoulder bolts.
4. Install hood on appliance by inserting into the two hood
clips. See Figure 11.3.
HOOD
Figure 11.3 Install Majestic Decorative Barrier front and Angled Hood
Majestic • QUARTZ32IFTN/L, QUARTZ36IFTN/L, QUARTZ42IFTN/L Installation Manual • 2641-980 Rev. C • 9/20
68
SHOULDER
DECORATIVE
FRONT
BOLTS