Table of Contents
Advertisement
32
www.aeg.com
3. When the programme is completed
and the door locked indicator
goes off, you can open the door.
4. Press the On/Off button for a few
seconds to deactivate the appliance.
14. SETTINGS
14.1 Introduction
1. In the programme summary screen,
just tap on the screen to return to the
programme list screen.
2. Scroll the list up or down to find
Settings.
3. Tap on the shortcut
setting menu.
4. Scroll the setting list up or down to
find the setting you want to change.
14.2
Set Clock
To change the time:
1. Tap on the Set Clock bar to enter
the submenu.
2. Scroll the minute and the hour bars
right or left to set the current time.
3. Tap on the Set Clock bar to return to
the machine setting list or tap on the
Programmes bar to return to the
programme summary screen.
14.3
Set Language
To change the language:
1. Tap on the Language bar.
2. Scroll the language list up or down to
3. The screen returns to the setting list
to enter the
14.4
You can regulate the display brightness
through 5 brightness levels.
To change the display brightness:
1. Tap on the Display Brightness bar.
2. Scroll the brightness level bar right or
3. Tap on the Display Brightness bar to
14.5
A buzzer sounds at the end of a cycle.
To deactivate the buzzer or to change
its duration:
1. Tap on the Cycle End Buzzer bar.
In any case, the appliance
empties the water out
automatically after
approximately 18 hours.
find the desired language and hold it
pressed.
automatically. Tap on the
Programmes bar to return to the
programme summary screen.
Display Brightness
left to find the desired level.
return to the machine setting list or
tap on the Programmes bar to return
to the programme summary screen.
Cycle End Buzzer
Advertisement
Table of Contents
