Settings - AEG LR6KOLN User Manual

9.2 Woolmark Wool Care - Blue

10. SETTINGS

10.1 Child Lock
With this option you can prevent children
from playing with the control panel.
• To activate/deactivate this option,
touch the Vlekken/Voorwas button
until the indicator
off on the display.
You can activate this option:
• After you touch the Start/Pauze
button: all the buttons and the
programme dial are deactivated
(except Aan/Uit button ).
• Before you touch the Start/Pauze
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.2 Acoustic signals
To deactivate the acoustic signals when
the programme is completed touch the
Vlekken/Voorwas and the Makkelijk
strijken buttons simultaneously for about
3 seconds.
The acoustic signals, they
continue operate when the
appliance has a malfunction.
10.3 Operating Hours
Counter
It is possible to visualise the total
operating time of the appliance in hours,
starting from the first switching on. This
value will count operating time of the
cycles (does not include pauses, delayed
The wool wash cycle of this machine has
been approved by The Woolmark Company
for the washing of wool garments labelled as
«hand wash» provided that the products are
washed according to the instructions on the
garment label and those issued by the manu‐
facturer of this washing machine. M1511
The Woolmark symbol is a Certification mark
in many countries.
comes on/goes
start time). To visualise this value,
proceed as follows:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Turn the programme knob to the first
programme.
3. Press and hold the Vlekken/Voorwas
and Makkelijk strijken buttons for
some seconds (within 10 seconds
after the switching on. After these 10
seconds, the key combination
activates and deactivates the
acoustic signals).
4. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. 1276 hours, the
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).
If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.
10.4 Factory Reset
This function allows to restore the factory
default options. To activate this option
follow steps below:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Turn the programme knob to the third
programme.
ENGLISH 21