Behringer ULTRADRIVE PRO DCX2496 Sync Manual page 26

The changes made on the screen are immediately transmitted to the second
DCX2496 with ID 2.
Please look at the blue bar at the top of the window: Here you can observe which
DCX2496 is currently connected to the remote software. In the above case, it is
connected to our "second device" (with the device ID 2).
Example 4: PC to 2 DCX2496s (PC<RS485>1
1. Connect the first DCX2496 via its LINK A port (RS485) to the RS485 port of your PC
card. (This will only work with a true RS-485 card, not a standard network card like
those found in laptops!)
st nd
DCX<RS485>2 DCX)
25