Behringer ULTRADRIVE PRO DCX2496 Sync Manual page 14

8. You have different "Synchronizing" options:
Loading Presets and/or the current set from the DCX2496 to the PC:
o Select the "Direction" DCX2496 -> PC
o Select the "Data" you wish to transfer (Current Set and/or Internal
o Click "Synchronize" and wait until the transfer is complete
o Click "Return" to go back to the main editor
Copying Presets and/or the current set from the PC to the DCX2496:
o Select "Direction" PC -> DCX2496
o Select the "Data" you wish to transfer (Current Set and/or Internal
o Click "Synchronize" and wait until the transfer is complete
o Click "Return" to go back to the main editor
If you just wish to edit the current preset remote-controlled from the PC,
please select the following icons/check boxes:
Then click "Synchronize" and wait until the transfer is complete
Then click "Return" to go back to the main editor
Presets and/or Card Presets)
Presets and/or Card Presets)
13