INSTRUMENT PANEL
FI
The oil pressure indicator light 3,
engine coolant temperature indi-
cator light 5, fuel injection sys-
tem indicator light 6, LCD and
meter needle work as follows to
confirm their function when the
ignition switch is turned to the
"ON" position.
•
The oil pressure indicator light
3, engine coolant tempera-
ture indicator light 5 and fuel
injection system indicator light
6 come on for 2 seconds.
•
The meter needle moves to
the full scale position and
returns to the home position.
•
All LCD segments appear/dis-
appear and then show the nor-
mal display.
E
F
GEAR
A B
SPEEDOMETER 1
The speedometer indicates the
road speed in kilometers per hour
and miles per hour.
If the speedometer needle does
not point to zero, follow the proce-
dure below to reset the speedom-
eter.
1. Press and hold the button 9
and turn on the ignition switch.
2. Hold the button 9 for 3 sec-
onds.
NOTE: The reset procedure, from
step 1 to step 2, should be per-
formed within 10 seconds.
TURN SIGNAL INDICATOR
LIGHT "" 2
When the turn signals are being
operated either to the right or to
the left, the indicator light will blink
intermittently.
NOTE: If a turn signal light is not
operating properly due to bulb fila-
ment or circuit failure, the indica-
tor light blinks more quickly to
notify the rider of the existence of
a problem.
3-8