Suzuki VL800 Manual page 114

IGNITION SYSTEM CHECK
1. Remove the spark plugs and
reattach them to the spark
plug caps.
2. Put the engine stop switch in
the "" position and the igni-
tion switch in the "ON" posi-
tion. While holding the spark
plug with
against the engine, push the
electric starter switch. If the
ignition system is operating
properly, a blue spark should
jump across the spark plug
gap. If there is no spark, take
your machine to your autho-
rized Suzuki dealer or a quali-
fied mechanic.
its base firmly
 WARNING
Performing the spark test
improperly can be hazardous.
You could get a high voltage
electrical shock if you are not
familiar with this procedure.
Do not perform this check if
you are not familiar with the
procedure. Do not point the
spark plug near the spark plug
hole during this test. Do not
perform this test if you have a
heart condition or wear a pace-
maker.
COMPLAINT: Engine stalls.
1. Make sure there is enough fuel
in the fuel tank.
2. If the fuel injection indicator
displays "FI", showing signs of
trouble in the fuel injection sys-
tem, take your machine to an
authorized
Refer to the "INSTRUMENT
PANEL" section for an explana-
tion of the fuel injection system
indicator.
3. Check the ignition system for
intermittent spark.
4. Check the idle speed. If neces-
sary, adjust it using a tachom-
eter. The correct idle speed is
1000 – 1200 r/min.
8-3
Suzuki dealer.