Instrument Panel - Suzuki AN650Z Manual

INSTRUMENT PANEL

SPEEDOMETER 1
The speedometer
speed in km/h or mph.
If the meter needle does not point to
zero, follow the procedure below to
reset the meter.
1. Press and hold the ADJUST but-
ton H and turn on the ignition
switch.
2. Hold the ADJUST button H for 4
seconds.
indicates road
2-8
TURN SIGNAL INDICATOR LIGHT
"" 2
When the turn signals are being oper-
ated either to the right or to the left,
the indicator light will blink intermit-
tently.
NOTE: If a turn signal light is not
operating properly due to bulb fila-
ment or circuit failure, the indicator
will blink quickly to warn the rider of
the existence of a problem.
BRAKE LOCK INDICATOR LIGHT
3
This light comes on when the parking
brake is applied and the ignition
switch is in the "ON" position.