Table of Contents
Advertisement
Installing KX600
NOTE
Recommended lateral placement of the KX6xx unit
1
The recommended placement of the KX6xx device should be approximately
4.30" (109mm) from center of the device to the edge of window frame; any
protruding objects from the wall beyond 1.5" (38mm) may obstruct the full
rotation of the device but will not impact overall function.
2
If the curb distance from the wall is < 11.5" (292mm) then it is recommended to
reduce the depth of the installation into the wall to maintain the recommended
distance.
3
Based on the direction of the traffic flow, it is recommended to install a bollard,
a concrete pole to protect the device from accidental impacts from vehicles.
The material and the process used to install the device are at the site owner's
discretion.
Following are the steps to install KX600 kiosk unit.
1
Identify the wall where you want to mount the KX600 kiosk. Ensure there is
enough space so that the device can freely move till ± 90 degree.
S
Installing KX600
KX600 I
G
NSTALLATION
UIDE
ETUP
17
Advertisement
Table of Contents
