Securing Your Child - Britax Diplomat User Manual

Securing Your Child

Once child restraint has been installed in the
vehicle and adjustments have been made,
follow these instructions to secure child.
1� Loosen harness by pushing the adjuster
button located in front of the restraint,
then pull the shoulder straps forward
A).
2� Release chest clip by squeezing tabs and
sliding pieces apart
3� Unfasten harness buckle by pressing
release button and sliding tongues out.
4� Move harness straps to the side of
restraint.
• Use harness holder located on straps and side of
cover to aid in holding straps.
5� Place child in restraint.
6� Position harness straps around child and
fasten harness buckle
clip.
• Proper connection of harness buckle is confirmed
with a positive click after inserting the second
buckle tongue.
7� Gently pull up on harness straps to tighten
lap section of harness which should fit
across child's upper thighs.
8� Slowly pull adjuster strap to tighten
harness around the child
9� Position chest clip at middle of child's
chest, level with child's armpits
10� Verify that harness is not twisted and child
is properly secured.
(fig. B).
(fig. C) and chest
(fig. D).
(fig. E).
Securing Your Child
(fig.
A
B
C
31