Britax Diplomat User Manual page 23

7� Hold shoulder belt tight, then rotate lock-
off upward until secured (fig. E).
• If your vehicle is equipped with an automatic locking
retractor (ALR), use of lock-offs is not required as
long as ALR is activated. Check your vehicle's owner's
manual to determine type of retractor your vehicle
has, and for proper use of retractor.
8� Verify all connections are secure and restraint
is stable. The restraint is secure when it
cannot be moved front-to-back or side-to-
side more than 1" (2.5 cm.) at belt path. If
restraint is not secure, repeat procedure or
use an alternate seating location.
9� If using Versa-Tether
installation (pages 23-26) and store excess
webbing in tether pouch.
Removal
Disconnect the Versa-Tether
While pushing restraint firmly into vehicle seat, release lock-off
and vehicle belt.
Installation: Forward Facing
complete Versa-Tether
®
from tether anchor if attached.
®
D
®
E
21