5�
Rotate seat into forward-facing position.
6�
Verify LATCH strap is not twisted, then attach
remaining LATCH connector to adjacent
LATCH anchor (fig. D).
•
A positive click confirms attachment.
7�
Push child restraint into vehicle seat while
pulling each LATCH strap tight (fig. E).
8�
Verify all connections and restraint are
secure. The restraint is secure when it
cannot be moved front- to-back or side-to-
side more than 1" (2.5 cm.) at belt path. If
restraint is not secure, repeat procedure, or use
an alternate seating location or vehicle belt
installation method.
9�
If using Versa-Tether
Tether
installation (pages 23-26) and store
®
excess webbing in tether pouch.
Removal
Disconnect the Versa-Tether
While pushing restraint firmly into vehicle seat, press red release
buttons on LATCH connectors to release. When not in use, always
store LATCH connectors and Versa-Tether.
Installation: Forward Facing
complete Versa-
®
from tether anchor if attached.
®
D
E
19