Auto Restart - Dimplex DPRC35ECO Instruction Manual

Table of Contents

Advertisement

• When the unit is off, press the Timer button to initiate the Auto-on start
program, press it again within 5 seconds will initiate the Auto-off stop
program.
• Press or hold the UP or DOWN button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour increments up to 24 hours. The
control will count down the time remaining until start.
• The system will automatically revert to display the previous temperature
setting if there is no operation in a 5 seconds period.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0
will cancel the Auto Start/Stop timer program.
SLEEP (ECO) operation
• Press this button, the selected temperature will increase(cooling) or
decrease(heating) by 1°C/2°F (or 1°F) 30 minutes. The temperature will then
increase (cooling) or decrease (heating) by another 1°C/2°F (or 1°F) after an
additional 30 minutes. This new temperature will be maintained for 7 hours
before it returns to the originally selected temperature. This ends the Sleep/
Eco mode and the unit will continue to operate as originally programmed.
NOTE: This feature is unavailable under FAN or DRY mode.
AUTO-RESTART
If the unit breaks off unexpectedly due to the power being cut, it will restart
with the previous function setting automatically when the power resumes.
15429_Dimplex DPRC35ECO Manual.indd 19
15429_Dimplex DPRC35ECO Manual.indd 19
19
9/09/20 5:51 PM
9/09/20 5:51 PM

Advertisement

Table of Contents
loading

Table of Contents