Brinkmann Charcoal Smoker Owner's Manual page 7

Step 6
Install smokestack inside smokestack pilot
as illustrated. Tighten smokestack screw
9
with ⁄ " wrench.
16
Step 7
To install air vent damper, open the firebox
door and attach damper to inside of firebox
door as illustrated. Do not overtighten as this
will make the air vent difficult to open and
close.
NOTE: Make sure air vent damper handle
faces outside of the firebox door.
Step 8
Attach the door latch to the outside of the
firebox door as illustrated. Do not
overtighten hex nut.
CAUTION: A metal bucket must be kept
under grease hole at all times.
Empty or replace bucket when w
full to prevent spills during
removal. Use caution when
removing bucket to avoid spilling
hot grease.
Metal Bucket
(not included)
Step 9
Remove nut from temperature gauge hole
in smoker. Remove tightening ring from
gauge. Screw probe into temperature
gauge hole in smoker. DO NOT
OVERTIGHTEN!
Temperature
Gauge
Temperature
Gauge Hole
6
Grease
Hole
Smokestack
Smokestack
Pilot
Smokestack
Screw
Butterfly
Damper