Kohler Intelligent Toilet Homeowner's Manual page 6

Docking Station
Remote Control - General Features
IMPORTANT! To activate features using the remote control, the remote must be paired with the toilet.
Refer to the "Remote Control - Setup" section.
Press the power button to turn the remote control on or off.
Stop - Press the "stop" icon to stop an activated cleansing wash feature. Press and hold to turn off
the remote control.
Eco Flush - Press the "eco flush" icon to flush the toilet with 0.8 gpf (3.0 lpf).
Full Flush - Press the "full flush" icon to flush the toilet with 1.0 gpf (3.8 lpf).
Seat Cover - With the seat unoccupied, press this "cover" icon to open or close the cover.
Seat - With the seat unoccupied, press the "seat" icon to open or close the seat.
Dryer - While seated, press the "dryer" icon to activate air flow. This feature will stop automatically
after 4 minutes or can be stopped by pressing the "stop" icon.
UV Disinfection - With the seat unoccupied, press the "sanitize" icon to initiate wand disinfection.
Heated Seat Temperature - While seated, press the "seat temp" icon, then press the "+" or "–" icon
to increase or decrease the temperature. The dots to the left of the icon indicate the temperature
setting. There are five settings.
1295780-5-A
Power Button
6 Kohler Co.