Table of Contents
Advertisement
Changing the menu settings
Icon/item
HiFi SOUND
AUDIO MIX
NTSC PB
LCD BRIGHT
LCD B. L.
LCD COLOUR
Note on AUDIO MIX
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewwing the picture on
the TV.
Notes on LCD B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, BRIGHT is automatically selected.
88
Mode
Meaning
z STEREO
To play back a stereo tape or dual sound track
tape with main and sub sound
1
To play back a stereo tape with the left sound or
a dual sound track tape with main sound
2
To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
——
To adjust the balance between the stereo 1 and
stereo 2
z ON PAL TV
To play back a tape recorded in the NTSC colour
system on a PAL system TV
NTSC 4.43
To play back a tape recorder in the NTSC colour
system on a TV with the NTSC 4.43 mode.
——
To adjust the brightness on the LCD screen with
the SEL/PUSH EXEC dial.
To darken
z BRT NORMAL
To set the brightness on the LCD screen normal
BRIGHT
To brighten the LCD screen
——
To adjust the colour on the LCD screen, turning
the SEL/PUSH EXEC dial to adjust the
following bar
To reduce
intensity
ST1
ST2
To lighten
To increase
intensity
POWER
switch
PLAYER
PLAYER
PLAYER
PLAYER
CAMERA
PLAYER
CAMERA
Advertisement
Table of Contents
