Running Parameter Query - Hisense AUD-09HX4SVNL Technical & Service Manual

W I R I N G D I A G
W I R I N G D I A G
1 1 .
1 1 .

11.4 Running Parameter Query

Running parameter can be referred by specified wired remote controller.
Query by wired remote controller
Operation:
1.Connect wire remote controller with indoor unit(same method as Indoor unit parameter revise )
2.Changing system parameter
OPERATION：
①Hold down both"MODE"button and"ADD.FUNC."button for 3 seconds, symbol
number blinking at the same time.
"" "button to select parameter number as you need, parameter value will be displayed on
②Press"
the LCD.
Parameter Code
06
07
08
09
10
11
12
13
14
15
16
24
25
26
28
29
30
31
32
33
43
57
58
60
Note:For some models, some parameter values will not display on the wired controller.
R A M
R A M
Parameter Description
Indoor unit air inlet temperature
Indoor unit coil sensor temperature
Outdoor unit ambient sensor temperature
Discharge temperature
Suction temperature
Outdoor coil temperature
Discharge pressure
Suction pressure
Outdoor EEV opening
AC current input
AC voltage
Error code
Drive error code
Indoor unit air outlet temperature
Compressor current
Indoor unit room temperature
Indoor unit coil inlet temperature
Indoor unit coil outlet temperature
Outdoor unit condenser inlet temperature
Outdoor unit condenser outlet temperature
Outdoor unit defrost temperature
Outdoor fan 1 speed
Outdoor fan 2 speed
Indoor fan speed
102
and parameter