Hisense AUD-09HX4SVNL Technical & Service Manual page 101

W I R I N G D I A G
W I R I N G D I A G
1 1 .
1 1 .
Indoor unit parameter revise
Internal control parameter adjustment can be performed using wire remote controller .
1. 1.Connect wire remote controller with indoor un
Step 1:Removing the upper cover of the wired controller
Insert a normal screw driver into the position,
and gently rotate it. In this way, the upper
cover can be easily removed.
Note:
Control board of the remote controller is placed on upper cover. Please protect it from being scratched during
removal and installation!
Step 2: Connecting wired controller with indoor unit
Indoor unit control board
1. Changing system parameter
确 定
R A M
R A M
Upper cover of the wired controller
Lower cover of the
wired controller
marked with:wired
99
Connection cord of wired
controller (to indoor unit)
Wire remote controller