Easy Operation Guide (Front Panel); Selecting A Tone; Adjusting The Volume; Making Settings For Each Function (Function) - Roland FP-30X Owner's Manual

Easy Operation Guide (Front Panel)

Selecting a Tone

Hold down the Tone select button and press one of the following keys; the sound changes.
Selecting a Piano
Hold down
C2
Harpsi 8'+4'
Harpsichord
Magical Piano
Ragtime Piano
Rock Piano
Bright Upright
Mellow Upright
Upright Piano
C1
Bright Piano
Mellow Piano
Ballad Piano
Concert Piano
Turning On/Off the Power
Long-press the [L] button.
& "Turning On/Off the Power" (p. 5)

Adjusting the Volume

Use the two Volume buttons to adjust the volume.
Volume (right) button: Increases the volume.
Volume (left) button: Decreases the volume.
* The number of indicators lit above the Volume
buttons changes according to the volume setting.
If all indicators are lit, the volume is at its maximum.
If all indicators are unlit, there will be no sound.
* If you hold down a Volume button, the volume
changes more quickly.

Making Settings for Each Function (Function)

To make function settings, hold down the [Function] button and play the key
corresponding to the setting you want to make.
You can make the following function settings.
& For detail, refer to "Advanced Operation" (p. 9).
Function Value
Auto off Off, 10 minutes, 30 minutes, 240 minutes
Speaker switch
Off, Stand, Desk
USB flash drive songs Play, Select
Master tuning 415.3–466.2 Hz (0.1 Hz units)
Key touch 5 steps, fixed (FIX)
Brilliance 3 steps
Ambience
11 steps
Twinpiano Pair, Individual
Transpose -6–+5
MIDI transmit channel 1–16
SMF play mode Auto Select, Internal, External
Local control
On, Off
Input Volume 10 steps
Bluetooth On, Off
* By long-pressing the [Function] button, you can begin pairing with a Bluetooth
device.
2
Selecting an E. Piano Selecting Other Sounds
Hold down Hold down
A.Bass+Cymbl
AcousticBass
Steel-str.Gt
Nylon-str.Gt
Accordion Comp'd JBass
ChurchOrgan2 Jazz Scat
ChurchOrgan1 Flip Pad
Nason Flt 8' Trancy Synth
Pipe Organ Super Saw
Light Organ * Solina
Lower Organ * Soft Pad
Mellow Bars * JP8 Strings
Full Stops * D50 StackPad
Gospel Spin * Choir Aahs 2
Ballad Organ * Choir Aahs 1
Combo Jz.Org * Super SynPad
B.Organ Slow * OrchestraBrs
Celesta Harpiness
Vibraphone String Trio
Clav. Orchestra
80's FM EP SymphonicStr2
Phase EP Mix SymphonicStr1
Wurly 200 Rich Strings
1976SuitCase Epic Strings
Layering Two Sounds (Dual)
By pressing two Tone buttons simultaneously, you can layer
two sounds.
Press simultaneously
Mix Balance
You can adjust the mix balance of the two sounds (five steps, 0
= default value).
Either of the lit Tone
buttons
1
Hold down
* You can switch the rotation speed of the rotary effect by pressing
the [E.Piano] button when an organ sound indicated by the (*)
symbol is selected.

Playing Different Tones with Left and Right Hands (Split Play)

Turn the [Split] button on, and the keyboard is divided into left and right sections,
allowing you to play a different sound in each section.
If you hold down the [Split] button, the Tone button assigned to the left section will
light.
* When using Split play, the effect of the pedal connected to the Pedal 1 or Pedal 2 jack
applies only to the tone of the right section.
Switching Sounds (Split)
While pressing the [SPLIT] button, hold down one of the
Switching the left sound
Tone buttons, and press a key.
Switching the right
Use the same operation as in "Selecting a Sound, "
sound mentioned above.
Changing the Point Where the Keyboard Is Divided (Split Point)
Hold down the [SPLIT] button and press a key (Default: F#3).
B1
1
Hold down
Mix balance Mix balance
for Split for Dual
C5
0 0
– + – +
2
B6
2