Setting The Weekly Schedule; Viewing Basic Information - Navien NPE-180A2 Installation Manual

Setting the Weekly Schedule

When setting up the Weekly option, select Weekly,
and select 1 Day, 3 Day, or 7 Day to go to the
Schedule menu.
Working
( 00:00 -
01:00,
12:00 -
13:00)
Press the Up button (
to choose the scheduled time. You can choose the
time in 30 minutes intervals. To finalize the weekly
schedule settings, press and hold the OK button
( ) for more than 2 seconds.

6.4.2 Viewing Basic Information

1. Press the Menu button (
Status Information.
Not
working
) or the Down button (
), and then select 2.
2. Press the Up button (
( ) to switch between the information items.
Press the OK button (
view its information.
Item
1. Operation State
2. Heat Capacity
3. Flow Rate
4. H/Ex Flow Rate
)
5. Out Water Temp
6. In Water Temp
7. H/Ex Out Temp
8. H/Ex In Temp
9. Exhaust Temp
10. Water Adjust
Valve
11. Mixing Valve
12. Flame Valve
13. Current RPM
14. Current APS
15. HotButton Ext.
Temp
16. AHU Outdoor
Temp
17. AHU Outdoor
SH Temp
) or the Down button
) to select an item and
Description
Current operation state
Current heat capacity
Current flow rate
Calculated difference
produced by the OPEN
condition of the mixing
valve at full flow
Current outlet water
temperature
Current inlet water
temperature
Current heat exchanger
outlet water temperature
Current heat exchanger
inlet water temperature
Current exhaust gas
temperature
Current flow regulating
valve state
Current mixing valve state
Flame detection current AD
value
Fan RPM
APS voltage
Current temperature of the
HotButton kit's optional
external surface thermostat
when the HotButton kit is
connected
Current AHU outdoor
temperature when the AHU
is connected
Heating set temperature
based on the current AHU
outdoor temperature
Operating the Water Heater 85