Table of Contents
Advertisement
Click Search
This page will then display.
You will see the BSSID as well as SSID
provided by your ISP display on the AP
List. Here takes 00-1D-0F-11-22-33
and WISP for example.
Click Connect
Then it will automatically paste the
SSID and BSSID value into the
corresponding field
Click Next
Click Finish to exit the Quick Setup
wizard and wait until the AP completes
rebooting. After that the changes will
take effect.
Click Finish
B.
Configuration for Point-to-Point Connection
Two TL-WA7510N Access Points are needed for this application.
Note
1) The AP Setting
Select Standard AP
Click Next
6
Advertisement
Table of Contents
