Table of Contents
Advertisement
Appendix 2: Troubleshooting
T1.
How do I restore my AP's configuration to its factory default settings?
With the AP powered on, press and
hold the Reset button for about 8
seconds before releasing it.
Hold it in for about 8 seconds
Once the AP is reset, the current configuration settings will be lost and you
Note
will need to reconfigure the AP.
T2. What can I do if I forget my password?
1)
Restore the AP's configuration to its factory default settings. If you don't know
how to do that, please refer to previous section T1;
2) Use the default user name and password: admin, admin;
3) Try to reconfigure your AP by following the instructions of this QIG.
T3. What can I do if I cannot access the web-based configuration page?
You should first configure your computer's IP Address.
Please follow the steps below to finish your PC configuration.
For Windows 7 OS
Go to Start > Settings > Control
Panel, and then you will see the
following page.
Click View network
status and tasks
12
Advertisement
Table of Contents
