Table of Contents
Advertisement
Operation Mode Setting
This page will then display.
Click Next
Choose the Operation Mode Type
appropriate to your needs
Click Next
The AP supports three operation modes: Standard AP, AP Router and A P
Note
Client Router.
a) If you want to connect to your WISP, please choose A P Client Route r
mode and proceed to A
b) If you want to configure a point-to-point connection, please skip to B;
c) If you want to configure a repeater, please skip to C.
A.
Configuration for WISP Client (CPE)
This page will then display.
Choose your WAN Connection
Type provided by your ISP. Here
we choose PPPoE for example
Click Next
Enter the Username and Password
provided by your ISP
Click Next
The Username and Password are provided by your ISP.
Note
5
2
Advertisement
Table of Contents
