Appendix 1: External Antenna Installation
1
External Antenna Connection
1. If you have an external antenna with the RP-SMA port, you could connect it to
the RP-SMA port of your CPE directly.
2. If you have an external antenna with N type port, you could connect it to the
TL-WA7510N with a pigtail cable. To protect your product, you could also add
a surge protector. The complete connection would be simply illustrated as
below.
The pigtail cable is used to change the N type port to RP-SMA type port.
Note
2
Configure the External Antenna
You will need to assign your computer a Static IP address within the same
Note
range as the AP's IP address. See the Appendix 2: Troubleshooting - T3
if you need assistance.
Login
Open your web browser, type
http://192.168.1.254 in the address
field and press Enter
10