Other Features; Set Alarm Timer; Set Sleep Timer; Route Audio From Other Devices - Philips DCM3100 User Manual

9 Other features

Set alarm timer

This product can be used as an alarm clock. You
can select the disc, iPod/iPhone library, PHILIPS
SOD\OLVW )0 RU ZPDPS ÀOHV RQ D 86%
storage device as alarm source.
Note
‡
Make sure that you have set the clock correctly.
‡
If no playlist named "PHILIPS" exists in the iPod/iPhone
or the playlist includes no playable track, this product
switches the alarm source to iPod/iPhone library.
‡
If other alarm sources are unavailable, this product
switches to FM mode automatically.
1
In normal standby mode, press and hold
SLEEP/TIMER until
timer) and
scroll on the display.
»
is displayed.

Press SOURCE repeatedly to select an
alarm source.
‡ To use iPod/iPhone playlist as the
alarm source, create a playlist named
´3+,/,36µ LQ \RXU L3RGL3KRQH ÀUVW
3
Press SLEEP/TIMER WR FRQÀUP
» The hour digits blink.
4
Press / repeatedly to set the hour,
and then press SLEEP/TIMER WR FRQÀUP
» The minute digits blink.
5
Press / to set the minute, and
then press SLEEP/TIMER WR FRQÀUP
»
XX (XX indicates the volume
level of alarm) blinks.
6
Press VOL +/- to set the alarm volume,
and then press SLEEP/TIMER WR FRQÀUP
»
is displayed.
20 EN
(set the
(select a source)
‡ To deactivate the alarm timer, press
SLEEP/TIMER repeatedly in normal
standby mode until
Tip
‡
When the alarm sounds, you can press VOL +/- to
adjust volume.

Set sleep timer

In working mode, press SLEEP/TIMER
repeatedly to select a preset period (15, 30, 45,
60, 90, or 120 minutes).
» When sleep timer is activated,
displayed on the lower-right corner of
VFD screen.
‡ To deactivate sleep timer, press
SLEEP/TIMER repeatedly until
is displayed.
Route audio from other
devices
Through AUX-IN sockets
disappears.
is
L R
L
R